1974 Chevrolet Camaro Exhaust Tail Pipe Parts

Choose your Submodel for your 1974 Chevrolet Camaro


Showing 1 - 2 of 2 products
Image
SKU
Product
Rating
Price

Flowmaster
  • Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required Use Offset Inlet/Center Outlet Mufflers Only
  • Tailpipe Set; Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required;
  • Tailpipe Set
  • Product Attributes:
    • Tubing Diameter: 2.500 In.
    • Automotive Item Grade: High Performance
    • Exhaust Pipe Wall Max Gauge: 16
    • Exit Position: Single Side
    • Inlet Diameter: 2.500 In.
    • System Type: Tailpipe
    • WARNING CA Proposition 65: No
    • Fitment: Direct Oe Replacement
    • Overall Length: 65.250 In.
    • Outlet Diameter: 2.500 In.
  • Features:
    • Mandrel Bent 16 Gauge Aluminized Tubing
    • Exits At Rear Of Vehicle
    • 3 Year Limited Warranty
    • Premium Flowmaster Quality
  • These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Center Outlet mufflers such as part# 942546 (Super 44 Series) or 942551 (50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1974 - Chevrolet Camaro V - 8 Cyl 5.7L LT 350

Flowmaster
  • Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required
  • Tailpipe Set; Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required;
  • Tailpipe Set
  • Product Attributes:
    • Tubing Diameter: 2.500 In.
    • Automotive Item Grade: High Performance
    • Exhaust Pipe Wall Max Gauge: 16
    • Exit Position: Single Side
    • Inlet Diameter: 2.500 In.
    • System Type: Tailpipe
    • WARNING CA Proposition 65: No
    • Fitment: Direct Oe Replacement
    • Overall Length: 65.250 In.
    • Outlet Diameter: 2.500 In.
  • Features:
    • Mandrel Bent 16 Gauge Aluminized Tubing
    • Exits At Rear Of Vehicle
    • 3 Year Limited Warranty
    • Premium Flowmaster Quality
  • These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Center Outlet mufflers such as part# 942546 (Super 44 Series) or 942551 (50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1974 - Chevrolet Camaro V - 8 Cyl 5.7L Z28 350
Showing 1 - 2 of 2 products

Loading...